§ 63.1034. Closed vent systems and control devices; or emissions routed to a fuel gas system or process standards.
254 words·~1 min read·
/us/cfr/t40/s§ 63.1034·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)Compliance schedule. The owner or operator shall comply with this section no later than the compliance date specified in the referencing subpart.
(b)Compliance standard.
(1)Owners or operators routing emissions from equipment leaks to a fuel gas system or process shall comply with the provisions of subpart SS of this part, except as provided in § 63.1002(b).
(2)Owners or operators of closed vent systems and control devices used to comply with the provisions of this subpart shall comply with the provisions of subpart SS of this part and (b)(2)(i) through (b)(2)(iii) of this section, except as provided in § 63.1002(b).
(i)Nonflare control devices shall be designed and operated to reduce emissions of regulated material vented to them with an efficiency of 95 percent or greater, or to an exit concentration of 20 parts per million by volume, whichever is less stringent. The 20 parts per million by volume standard is not applicable to the provisions of § 63.1016.
(ii)Enclosed combustion devices shall be designed and operated to reduce emissions of regulated material vented to them with an efficiency of 95 percent or greater, or to an exit concentration of 20 parts per million by volume, on a dry basis, corrected to 3 percent oxygen, whichever is less stringent, or to provide a minimum residence time of 0.50 seconds at a minimum temperature of 760 °C (1400 °F).
(iii)Flares used to comply with the provisions of this subpart shall comply with the requirements of subpart SS of this part.
Connections1 cite this
Cited by 1 section
Citation graph
cites case law
§ 63.1034
Closed vent systems and control devices; or emissions routed to a fuel gas system or process standards.
Fed. Reg.×1
Cites 0Cited by 1 across 1 source